CTC Union 6212576, Installation And Maintenance Manual

Page: 23 / 44

23
CTC EcoLogic S
Menu: "Installer / Defi ne /Remote Control".
3.4 Defi ne
3.4.1 Def. Remote control
Remote control is defi ned by setting a normal mode
for the external control signal with the "NO" (Normally
Open) or "NC" (Normally Closed) options.
For example, the control signal can be generated by a
two-position switch. If, when used, the switch generates
a control signal on the input (circuit closes), the circuit
shall be defi ned as NO.
External control NO/NC/DHW NO/DHW NC/BMS
Set whether the heat pump, with external control,
should charge the DHW tank or heating tank or whether
external control should be applied via BMS.
• NO/NC: When the circuit is closed (at normal
mode NO), the temperature to the external heating
tank set in the "Installer/Settings/Heating Circuit/
Ext. control temp °C" menu is activated (factory
setting 30 °C).
DHW NO/DHW NC : When the circuit is closed
(at normal mode NO), the temperature to the
external DHW tank set in the "Installer/Settings/
Heating Circuit/Ext. control temp DHW °C" menu
is activated (factory setting 30 °C).
• BMS
External control applied via BMS. Defi ne settings
for BMS in the "Installer / Defi ne / Communication"
menu.
Ethernet Off/Modbus TCP
For information about Modbus TCP Port settings,
refer to the "Communication" section in the "Installer /
Settings" chapter.
Menu: "Installer / Defi ne /Remote Control".
3.4.2 Def. Communication
MyUplink No (Yes/No)
Select "Yes" to connect to the heat pump from the
MyUplink app.
Web No (Yes/No)
Select "Yes" to connect to the local web server. Internet
router and fi rewall required.
AXS No (Yes/No)
Select "Yes" to connect to the SmartControl wireless
communication accessory and/or WiFi.
For more information, refer to the "Installation/
Communication" chapter.
Menu: "Installer / Defi ne / Communication".