manualshive.com logo in svg

CTC Union 6212576, Installation And Maintenance Manual

Share
Download
CTC Union 6212576 Installation And Maintenance Manual Download Page 22

22

CTC EcoLogic S 

Menu: "Installer / Settings / Communication / MyUplink".

Menu: "Installer / Settings / Load My Settings".

3.3.4 

Save settings

Custom settings can be saved to "Bank" 1-3 and on a 

USB drive here. The "USB" row is greyed out until the 

USB drive is connected. The rows show the date and 

time of saved settings.

Press "OK" to confirm.

3.3.5 

Load settings

The saved settings can be recovered.

Press OK to confirm.

3.3.6 

Load factory settings

The product is supplied with the factory values set. 

Saved settings in "Bank" 1-3 are deleted when factory 

settings are restored. The selected language is retained.

Confirm with "OK". 

3.3.3.3  MyUplink

This menu is used for pairing with the MyUplink app. To 

request a connection code/token, press "Get token", 

confirm with "OK".

The menu bar is only clickable if the display is 

connected to the server.

The following values are displayed:

"Serial": Serial number 

"Token": Token/connection code

These must be entered in MyUplink when pairing.

Select the "Remove Users" and/or "Remove Service 

Partners" menu rows to delete these accounts from the 

system. Confirm with "OK".

Summary of Contents for 6212576













































Reviews:

No comments

Brands by name

Popular brands

Load more brands