BIOS Setup
Chapter 4: Troubleshooting the PA PowerStation
42
PA PowerStation User Guide
BIOS Setup
The PA PowerStation is limited in BIOS configuration changes that the
user can perform. The BIOS setup window lets you remove the CTC
splash screen only. If you want to reset this BIOS setting, press the
Delete key while the system is starting up to display the BIOS setup
window.
Note
Accessing the BIOS settings requires a keyboard.
To access the BIOS settings, complete the following steps:
1. Shut down the system.
2. Connect a keyboard to the system.
3. Restart the system.
4. While the system is starting, press the Delete key on the keyboard.
5. The BIOS Setup Utility screen appears.
Removing the CTC
Splash Screen
To remove the CTC splash screen, complete the following steps:
1. Press the Page Up key to toggle the Boot-time Diagnostic Screen
setting to [Disabled].
2. Press the Right arrow key to highlight Exit and then press Enter.
3. Press Enter again to save your changes and exit.
StockCheck.com