Preparing for Installation
Chapter 3: Installing the PA PowerStation
32
PA PowerStation User Guide
Preparing a Location
for the AC Power
Supply
You will need to read Preparing a Location for the AC Power Supply
only if you intend to operate the PA PowerStation using AC power. If
you plan to use DC power, proceed to Installing the PA PowerStation
on page 33.
If you plan to operate the PA PowerStation with AC power, and you
purchased CTC’s optional AC Power Supply and the mounting kit, use
the template that came with the mounting kit to prepare a location for
the power supply. You can prepare a location for the power supply
inside or outside the enclosure where the PowerStation is installed.
Note
If you decide to mount the Power Supply in an enclosure, mount
it on the bottom or the side of the enclosure to provide the best
convection cooling.
Prepare the Power Supply Mounting Surface
To prepare the mounting surface, complete the following steps:
1. Securely attach the template to the mounting surface.
2. Drill and debur four 0.17” (4.3mm) holes.
StockCheck.com