CSZ EZT-570i, Technical Manual

Page: 91 / 95

EZT-570i Technical Manual
91
8.16 Completing EZT570i Configuration
Any changes made in the configurator program must be backed up prior to cycling power to the EZT.
First, exit the configurator by selecting “Exit” from the “File” menu.
DO NOT cycle power to the
controller yet. First, manually back up the settings to EEPROM. To do this, you must rotate the small
pot on the control module CPU.
Figure 8-21 EEPROM Configuration Back-up
Gently turn the pot full counterclockwise, then fully clockwise and back counterclockwise again. The
small “STAT” LED on the CPU will blink indicating that the configuration has been saved. You can
now cycle power to the EZT and allow it to boot up normally.
If the settings are not backed up to EEPROM prior to cycling power, all changes will be lost
and the values will revert back to their original settings.
Memory Back-up Pot
STAT LED