HV DTemp Measurement System – Using a HV DTemp Measurement System
User Guide
45
Version 01.00 // 2021
CAN Defaults
11
Base CAN Identifier
The identifier base that is assigned to a newly generated
module. This entry can be modified if required.
Bit rate (bits/s)
Selection menu for specifying the bit rate. The bitrate defines how
many bits per second (bits/s) are transmitted on the CAN bus.
Message type
The message type defines the number of bits used for the
CAN identifiers of the messages (11 bit or 29 bit).
Busload Limit
Selection menu for setting the maximum bus load.
Sample Point
The time when a bit is read (sampled) is specified here in order
to determine its logical level.
CAN identifier assignment
Format for
CAN-Identifiers
Selection menu containing the following options:
f
Decimal
f
Hexadecimal
Single message
mode enabled
If this option is enabled, an individual CAN ID is assigned to
every temperature measurement value.
Assign inactive
channels
If this option is enabled, CAN IDs will also be assigned to inactive
channels.
Device Scan
Create additional
module configurations
If this option is enabled, then additional module configurations,
which were detected at the bus but which are not included in the
read-out device configuration, will be inserted.
License
License Expire Warning
If the option
Warn when License is expiring
is enabled, the
license expiration date stored in the license file will be verified.
A click on the
symbol opens a menu in which the time from
which on a warning is issued can be specified.
Warn when License
is expiring
If this option is set, the license expiration date stored in the
license file is verified. A warning of the impending expiration is
issued from the time specified via
License Expire Warning
.
Tab. 5-4:
Settings
dialog: setting options
11 Most of the settings in this section can also be specified in the
Parameter
section of the
CAN Bus
dialog.
