HV DTemp Measurement System – Using a HV DTemp Measurement System
User Guide
38
Version 01.00 // 2021
Setting options in the right section of the configuration window
DTemp_P System
section
The
Send rate
selection menu provides the means to set a different send rate if required.
The
Active Modules
entry shows the number of connected controllers. The number in brackets
(‘x’ licensed) indicates the number of controllers activated by the license.
CAN identifier
section
The input field
Identifier base
displays the currently specified identifier base.
→ See DTEMPconfig online help, page "DTEMPconfig user interface", section "CAN Identifier"
for further Information
.
DTemp_M Modules
section
The
DTemp_M Modules
section contains information and setting options for the controllers
that are included in the configuration.
f
The buttons
+M16
and
+M64
are used to insert controller table templates.
f
Use the switch to the right of these buttons to fade the measured temperature values in
or out
10
(equivalent to
Toggle On/Offline
in CSMconfig).
f
Measurement collection deactivated
: measurement values are not displayed
f
Measurement collection activated
: measurement values are displayed
By default, no measurement values are displayed, i.e. the switch is in position
Measurement
collection deactivated
.
Set the switch to
Measurement collection activated
.
⇨
The message "configuration_changed" is displayed in the cells of the
Measurement
column.
Fig. 5-23:
Measurement
table column: "configuration_changed"
To make the measured values available for the HVDTemp-P central unit, the changed confi-
guration has to be written to that device.
Fig. 5-24: Context menu, module level
Select
Write settings to device
from the context menu of the module.
⇨
The configuration is written to the central unit.
⇨
The measured values are displayed in the
Measurement
column.
10 The switch is only used to switch the display of the measured values on or off. The measured values are transmitted by the
HV DTemp-P central processing unit regardless of this setting.