HV DTemp Measurement System – Using a HV DTemp Measurement System
User Guide
41
Version 01.00 // 2021
Fig. 5-30:
Device Properties
dialog
Field name
Function
Device type
The device type
DTempP
is pre-set by default and cannot be
changed. This field is thus greyed out.
S/N
The configuration protocol uses that number to address a specific
module. Enter the serial number of the central unit into this field.
Device Name
A default name is displayed here at first, consisting of the name of
the device type and the serial number. Alternatively, an individual,
user-defined name can be entered.
f
The name must contain at least 1 character and a maximum of
24 characters.
f
Allowed characters are letters (A...Z, a...z), digits (0...9) and
underscore (_).
f
The name has to begin with a letter or digit (not an underscore).
Tab. 5-3:
Device Properties
dialog: setting options
If
Scan Bus
or
Auto-Configuration
are performed in an online configuration, the detected
serial number is displayed in the
S/N
field.
In an offline configuration, the serial number of an HV DTemp-P central unit has to be ente-
red manually into the
S/N
field.
Make the required settings.
Click on
OK
to close the dialog.
