12
【
A=B
】
Set VFO A the same as VFO B.
You would keep VFO A and VFO B the same when you want to transmit and receive on the same
frequency. This minimizes the spectrum usage and is a good practice when speaking to one other
person but is not always the optimum way of doing things.
【
SPLT
】
Select SPLIT operating mode on or off.
Split allows you to separate your transmit frequency from your receive frequency. This is a good
strategy where there is a "pileup" or there are many people trying to reach you at the same time.
When multiple people try to reach you at the same time and you try to answer on the same frequency,
you will probably have collisions. By separating the transmit and receive paths, while you are
transmitting, you will not be interfering with other people and you will be able to hear all the traffic
directed at you.
【
RIT
】
Select RIT (receiver incremental tuning) mode-adjust
This feature allows you to move the receiver frequency slightly offset from the transmitter
frequency. When in this mode, the transmitter frequency is locked in but the receiver frequency can
be moved slightly. When the RIT button is pressed, the Power Output display is used for the RIT
display and using the up key and down key sets the frequency offset.
【
POW
】
Set RF output power-adjust.
This feature is used to adjust the output power of the transmitter. The up key and the down key is
used to set the power level. The power output part of the display shows the current transmitter power.
Summary of Contents for CS108G+
Page 30: ...www connectsystems com...
