13
【
V/M
】
Select VFO or Memory mode.
When in the VFO Mode, the frequency knob will change the frequency. When in the Channel Mode,
the frequency knob will change the channel. In Frequency Mode, the VFO can be continually adjusted
to a resolution of 10 Hz. In the channel mode, the frequency is whatever the channel was
programmed for. There are 127 channels available for use.
【
M>V
】
In memory mode, move current frequency to VFO and switch to VFO mode.
This allows the user to select a known frequency and then use the frequency knob to search for traffic
around that frequency.
【
MW
】
In VFO mode, store current frequency and settings in memory
This will allow you to make up a new channel. By experimenting with the different bands, once you
find something interesting, you can store it as a new channel.
【
MC
】
In memory mode, clear selected memory channel
By clearing the existing memory, you can now store a different frequency in the channel than what was there
before.
Summary of Contents for CS108G+
Page 30: ...www connectsystems com...
