8.
A addition - Firmware update
Firmware updates can be downloaded here:
The .zip archives include:
•
Up to date configuration – diagnostics utility - csServoManager™ (install version)
•
simDrive™ servo driver firmware files (firmware)
•
Uploader which is a software for simDrive™ firmware updating
8.1
csServoManager™ utility update
csServoManager
utility update comes down to an installer launching
(section 5.1.2 – “ csServoManager utility software installation”).
8.2
simDrive™ firmware update
simDrive™ firmware update requires simDriveUploader.exe launching. First make a copy of your
servo drive settings and save them in csServoManager™.
Update procedure looks as follows:
1.
Make sure that simDrive™ servo driver is connected through RS232 (COM) port
(updates through CAN bus is not supported)
2.
Select your language and press „Start”
3.
Wait until the uploader will detect the connected drive.
4.
Select the file with new firmware.
5.
Wait until the update process ends.
6.
Close the uploader.
Only control system fitter/installer should perform the update because after update to newer
firmware version there can some new additional functions appear which need to be set. Update
performed by unqualified staff can lead to incorrect drive operation so it may even be not able to use
till it will finally be set correctly.
simDrive™ servo drive firmware must be compatible with csServoManager™ version. In other case
connection will not be possible. Always update csServoManager™ and simDrive™ firmware as well.
simDrive™ AC Servo Drive -
U
SER
G
UIDE
45
