: This instrument contains flammable refrigerant. Be careful when installing and
operating to prevent the risks of combustion or explosion.
: Risk of burns may be created when operating or maintaining.
: Risk of hand injuries due to improper operation or accidents when opening the
door.
Please make sure to follow the safety instructions!
●
Please use a lift or a forklift or other lifting apparatus to raise or move the instrument.
●
Make sure the power supply voltage matches the voltage of the instrument before it is
connected.
●
The instrument must be properly placed.
●
Use a grounded power socket.
●
Do not drag the power cord when unplugging.
●
Do not use a damaged or non-designated power cord.
●
Only qualified personnel are allowed to open the control box.
●
Keep the handle on the platform screwed when the instrument is running.
●
Keep the room ventilated.
Disconnect the power supply in any of the situations below:
●
Moving or transporting the instrument
●
Opening the power box
●
Changing the fuse
●
Malfunctioning of the instrument
●
Instrument is out of use for a long period of time
4. Safety Instructions
5. Installation
Lifting the instrument by hand should be prohibited. Please use a lift or a forklift or other
lifting apparatus to raise or move the instrument.
Note
5.1 Tool Requirements
a. H
ex wrench S10. Cross screwdriver #2. Single open-end wrench 24
b. A
lift or forklift or other lifting apparatus with a minimum loading capacity
of 350 kg (772 lb).
5.2 Installation
a. Ensure the installation site meets the requirement as instructed in Section 3.1.
b. First unit installation
:
Raise adjustable feet away from the ground.
c. Slowly and smoothly move the instrument on its wheels to its designated location.
d. Loosen the four adjustable feet with a wrench to touch the ground, keep it level, then
tighten the four adjustable feet with a wrench. The instrument needs to be stable and
cannot be moved.
14
13
Adjust the height of the feet to allow the instrument to move or be set
:
Adjust all feet up to off the
ground so the instrument can
move on its wheels.
Adjust the feet down to the
ground, the instrument will be
fixed.
