Crystal Vision
Installation
2 Installation
2.1 General Safety Summary
The following warnings are intended for user guidance and safety.
Ground
This product must be grounded through the grounding conductor of the
power cord.
Power cable
Use only a power cord that meets the required specification for this
product.
Fuses
To avoid fire hazard use only fuses of the type and rating specified.
Service
These servicing instructions are for use by qualified personnel only. To
reduce risk of electric shock, do not perform any servicing other than that
contained in this manual unless you are qualified to do so. Refer all
servicing to qualified service personnel.
Apart from procedures described in this manual there are no user
serviceable parts within the frame. If the frame requires any other servicing
it should be returned to the manufacturer or dealer.
On no account should the unit be powered whilst any covers are removed.
Ventilation
The unit must have adequate ventilation. Installation should be in standard
19" racks with cool air circulation available at the front. The left and right
ventilation grilles must not be obstructed.
EMC
To comply with EMC regulations the following guidelines should be
observed:
Do not operate this unit for extended periods with the front panel open.
Do not use the frame unless all the rear connector positions are filled,
either with Crystal Vision rear modules, or with Crystal Vision blanking
plates.
Do not operate the equipment with covers or panels removed.
General
To avoid electric shock do not operate this product in wet or damp
conditions.
To avoid injury or fire hazard do not operate this product in an explosive
atmosphere.
Only use this rack in conjunction with Crystal Vision modules designed for
that purpose.
Indigo 1 User Manual R1.14
7
27 February 2020
