Crystal Vision
Maintenance
Indigo 1-DP
The Indigo 1-DP range does not have externally accessible mains fuses. These are situated
on each of the power supply modules. To service these fuses it is necessary to remove the
power supply module from the frame.
PS-80i showing mains fuse
To replace the mains fuse first remove the protective cover. The fuse may then be prised from
its carrier with the aid of an instrument such as a flat bladed screwdriver. Take care not to
damage any surrounding components or wiring. Once the replacement fuse has been
inserted ensure the safety cover is replaced before refitting the module.
Note:
Replace the fuse only with one of the same type and rating (5A, 250V time
delay).
Indigo 1 User Manual R1.14
71
27 February 2020
