ROYAL COALS LAYOUT
ROYAL COALS LAYOUT
All pieces marked with a letter on underneath/arrow to face to rear
A
B
C
F
D
E
Issue 1 8
ALL PIECES MARKED UNDERNEATH WITH A LETTER
SHOWN LEFT
MAIN MATRIX (A) FITS AT REAR OF BURNER AS
SHOWN,BEHIND THE TABS OF MATRIX BRACKET AND
SITTING FLAT
FRONT BASE (B) FITS AS SHOWN ENSURING BOTTOM
IN CHANNEL OF MAIN BURNER WITH CUT OUTS OVER
SCREWS
WITH MATRIX AND FRONT BASE FITTED PIECE (C) IS
FITTED TO LEFT HAND SIDE
THE FRONT FITS SNUGLY INTO THE LUG ON FRONT
BASE AND AS FAR FORWARD AS POSSIBLE .
LUG SHOWN ABOVE
THE BACK IS LOCATED INTO THE GROOVE ON THE
MAIN MATRIX (A).
WITH (C).FITTED THE REAR MATRIX CAN BE MOVED
SLIGHTLY TO ALLOW THE PIECE (C) TO DROP INTO ITS
CORRECT POSITION
THIS PROCESS ALLOWS ALL THREE PIECES TO BE
ALIGNED CORRECTLY SO ENABLING THE FURTHER
PIECES TO LINE UP CORRECTLY
LUG
PIECE (F) SITS TO THE RIGHT INTO SHAPE OF SLOT AT
BOTTOM AND PULLED FULLY FORWARD WITH THE
BACK SITTING ON REAR MATRIX (A)
SLOT AT FRONT
PIECE (D) FITS WITH THE TWO POINTS AS SHOWN
FULLY FORWARD AND SITTING ON THE REAR MATRIX
TWO POINTS
(E) SITS BETWEEN (D) & (F) WITH THE STRAIGHT EDGE
FITTING SNUGLY INTO THE FRONT PIECE CUT OUT AS
SHOWN BELOW.
THE BACK SITS ON REAR PIECE AND LEFT BRANCH
RESTS ONTO PIECE (D)
ISSUE 2
22
