SHUT OFF PROCEDURE
1.TURN KNOB A RIGHT UNTIL REACHING STOP. IN THIS POSITION ONLY
PILOT GAS FLOWS
2.TO SHUT OFF VALVE COMPLETELY,PRESS DOWN SLIGHTLY AND
CONTINUE TURNING RIGHT FROM PILOT POSITION TO THE OFF
POSITION.THE SAFETY INTERLOCK PREVENTS RE-IGNITION OF THE
PILOT FLAME UNTIL THERMOCOUPLE HAS COOLED DOWN
SUFFICIENTLY(ELAPSED TIME WILL VARY BASED ON THERMOCOUPLE
TYPE)
3.SWITCHING OFF THE REMOTE IS NOT NECCESARY.
THE SENSOR AND BATTERY HOLDER A INSERTED BENEATH THE RIGHT
SIDE OF THE FIRE.TO REPLACE BATTERIES ALLOW FIRE TO COOL FOR
AT LEAST 30 MINUTES THEN PULL OUT BATTERY HOLDER, THE COVER
CAN SLIDE OFF AS ABOVE AND THE BATTERIES CAN BE
REPLACED.(
USE ONLY LIKE FOR LIKE ALKALINE AA BATTERIES)
REPLACEMENT PARTS
BATTERY HOLDER AND SENSOR CRYSMERTIKHOLDER
GAS VALVE CRYSMERTIKVALVE
REMOTE HANDSET CRYSMERTIKHANDSET
INSTALLATION INFORMATION
GAS SUPPLY: THE GAS CONNECTION CAN BE FROM EITHER THE
LEFT OR RIGHT HAND SIDE OF THE FIRE.ENSURE THAT THE GAS
PIPE DOES NOT PREVENT THE REMOVAL OF THE BATTERY HOLDER
AND SENSOR OR ACCESS TO OPERATE THE GAS CONTROL KNOBS
MODIFIED TECHNICAL DATA
INJECTOR SIZES
SUPER HEATRAVE/SLIMLINE/RUBY/LAGOON CAT 82/460
SAPHIRE
CAT 82/420
JEWEL
CAT 82/500
ISSUE 2
26
