CLEANING
GENERAL INFORMATION.
BEFORE CLEANING ANY PART OF THE FIRE, ENSURE THAT THE GAS IS TURNED OFF AND THE FIRE
IS COLD.
BLACK PAINT.
USE ONLY A CLEAN DAMP CLOTH. DO NOT USE ANY CLEANING AGENTS.
BRASS TRIM.
USE BRASSO ENSURING THAT IT DOES NOT COME INTO CONTACT WITH THE BLACK
PAINT FINISH.
IMPORTANT.
THE PAINT FINISH IS DURABLE AND HEAT RESISITANT,
HOWEVER IT WILL BE
DAMAGED IF PLASTER, CEMENT OR WALLPAPER PASTE COMES INTO CONTACT WITH IT.
COALS AND CERAMICS.
IF FOR ANY REASON IT IS NECESSARY TO REMOVE CERAMIC PARTS ,
THEN BEFORE REPLACEMENT THE BURNER SHOULD BE CHECKED THAT NO PARTICLES HAVE
DEPOSITED ON THE BURNER. IF NECESSARY VACUUM THEM CAREFULLY, THEN REFER TO
INSTRUCTIONS FOR REPLACING CERAMICS. THE COAL EFFECT LAYOUT MUST NOT BE ALTERED
AND ONLY THE PIECES SUPPLIED MUST BE USED.
FRET INFORMATION
A STANDARD 16 “ FRET IS SUITABLE TO SIT IN FRONT OF THE HEATRAVE S/L , HOWEVER A
MINIMUM FREE AREA REQUIREMENT MUST BE MET AS SHOWN BELOW.
B
A
MINIMUM FREE AREA FOR AIRFLOW
ON ASH PAN COVER “A” = 30CM2
MINIMUM FREE AREA FOR AIR FLOW
ON FRET “ B “ = 30 CM2
USER REPLACEMENT PARTS
CERAMIC SET CRY001S/L
BRASS TRIM CRY002S/L
ISSUE 1
