Issue 1
25
5.6 cleaning the glass
WARNING
NEVER USE THE APPLIANCE WITHOUT THE GLASS OR IF BROKEN OR CRACKED
To clean the glass panel remove it from the appliance by removing the 8 screws holding the frame
remember to support glass and remove carefully
Clean the glass using a damp cloth or ceramic glass cleaner do not use any abrasive cloth
if the glass has soot on it check the fuel layout and more important the aeration slots in the appliance
are not covered by the fuel
PLEASE NOTE :
the glass will need cleaning periodically , each time the appliance is used the
condensation produced will create marks on the inside glass panel and any impurities in the gas can
embed into the glass ,
only replace the glass if it is in good condition and free from cracks
to replace drop the base of the glass into the bottom bracket on the appliance and push the glass with
the thicker side of the seal towards the appliance and the whilst supporting the glass replace the glass
frame ensuring all 8 screws are screwed firmly in ,do not use a screw gun or you may damage the
threads it is best to start each one by hand if possible .
Spare parts
LOGS
CF3LOGSET
COALS
CF3COALSET
HANDSET
TESC HANDSET
TRIMS
CF3 TRIM (COLOUR)
ALL CRYSTAL FIRES PARTS ARE AVAILABLE FROM
www.crystalfires.co.uk
