Issue 1
16
4.2 cleaning
Before cleaning ensure the fire is not hot and appliance turned to off position
Remove trims from fire before cleaning ,pull off from magnets
Brass/chrome trims can be cleaned using suitable metal polish
coloured finishes can be cleaned using a damp cloth
Coals and ceramics will discolour with use
if it is necessary to remove fuel pieces before replacing them ensure no particles have fallen on
the burner and if this is the case remove before replacing the fuel pieces as per the instructions
Ceramics should be cleaned by shaking any debris from them ,under no circumstances brush
them or vacuum as this can damage them
4.3 installer spare parts
Part
code
Part
code
FUEL PIECES LOGS
CF3 logs
ODS manual
CF3 9077
FUEL PIECES COALS
CF3 coals
ODS remote
CF3 ERTA TESC
TRIM
CF3trim (colour) INJECTOR manual
CF3 340
GAS VALVE MANUAL
CF3 gas tap
INJECTOR remote
CF3 500
GAS VALVE REMOTE
CF3 TESC
4.4 Trouble shooting pilot problems
OTHER PARTS AVAILABLE ON REQUEST
Left
strong blue pilot this is
correct & safe
Right
yellow flame incorrect
aeration hole needs
cleaning
It is important the pilot flame stays strong and blue as on left as it creates good cross
lighting and no build up of gas of which can be dangerous if fire goes out on its own
check pilot
