background image

 

 
 

 
 

 

 

 
 

ATTENTION: READ THESES INSTRUCTIONS CAREFULLY BEFORE PROCEEDING TO ASSEMBLE YOUR SWIMMING POOL. 
REMIND ALL POOL USERS THAT THESE SAFETY INSTRUCTIONS MUST ALWAYS BE FOLLOWED-UP. KEEP THESE 
INSTRUCTIONS FOR FUTURE CONSULTATIONS. YOUR CHILDREN’S SAFETY DEPEND ON YOU! RISK IS HIGHER WHEN 
CHILDREN ARE UNDER 5 YEARS OLD. ACCIDENTS CAN HAPPEN TO EVERYBODY SO IF INSTRUCTIONS ARE NOT FOLLOWED 
MAY CAUSE HEALTH RISKS AND

 

ESPECIALLY WITH CHILDREN!

 

 

1. SAFETY GUIDELINES 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remember that safety is the most important factor when installing the swimming pool. Safety must 
be given priority over any decorative aspect. Do not lean, jump, sit, stand or walk on profiles. They 
have not been designed to that effect. 
Do not dive or jump headfirst in your swimming pool, do not jump from a ladder or elsewhere. This 
pool is not deep enough to dive without risk of accident. The self-adhesive sign 

“Unsupervised, 

your child in danger”

 

must be placed close to or on your pool. For replacement adhesives, please 

contact our factory. 
Do not use your swimming pool when being under the effects of alcohol, medicines or drugs. 
To avoid drowning and injuries, do not leave tables, chairs or other objects near the pool to prevent 
children from climbing into the pool. 
Do not install a slide on your swimming pool. 
To avoid electrocution risk, do not manipulate electrical equipment near to your swimming pool or 
with a wet body. Make sure that all electrical equipments are protected by a grounded switch. 
When bathing, never use metallic or puncturing foot wear. 
If your pool has a cover on, do not allow anybody, and especially small children, to walk or play on 
it. 
Assign one entrance and exit for our swimming pool. This area must be kept totally clean. Remove 
all object that could hurt barefooted people. 
Do not make holes in your swimming pool wall to install lights or any other devices. It could result in 
serious injuries, electrocution or property damage. 
For more security, we recommend to install a 122cms high fence or wall around your swimming 
pool made of a resistant material. All access doors/gates should have a lock installed at least at 
122cms high in order to prevent small children from 
opening them. If doors, windows and garden gates make part of the fence, make sure that they can 
be closed with a key or bolt. 
Do not use your swimming pool at night or when visibility is not good. The water of your swimming 
pool should be always kept clean in order to see the bottom and appreciate its depth. Users should 
be capable to see that the pool is not deep enough to dive. If you decide not to take into account 
this safety instruction, then it’s your responsibility to provide users the appropriate instructions on 
the correct use of this product and supply sufficient light. For lighting recommendations, consult 
your local licensed electrical contractor on the appropriate light so as to fulfil all local and national 
norms of electricity and other security requirements. 
If your pool is equipped with a ladder, then follow-up all safety guidelines and assembly instructions 
indicated in the manual. 
A ladder must be used to get in and out of the swimming pool. When not in use, the ladder should 
always be removed and kept in an inaccessible place. 
In order to maintain its stability, the ladder should be placed on a solid, levelled base at all times. 
Only one person at the time should be on the ladder. 
Install the ladder where the entrance/exit of your swimming pool will be. 
Never use your ladder for other aims. The pool ladder has not been developed for other 
applications. 
If your swimming pool is equipped with a filter, make sure that the swimming pool is filled with water 
and your filter correctly connected as indicated in the manual. 
During the bathing season, the filter must work every day, long enough to renew all the water at 
least one time. 

Attention

: All filter systems fulfil normative of installation NF C 15-100. It stipulates that all 

electrical item that is to less than 3.50mts from the swimming pool and freely accessible, must be 
fed on very low tension.12 volts. 
All electrical item fed on 220 V must be place at least, at 3.50

mts from the pool’s edge. A 

permission of the manufacturer is needed to modify any of the components of the filtration system. 
Verify all parts of your pool on a frequent basis in order to detect possible failures and make sure all 
components are installed correctly. Always replace components with original TOI spare parts. 
This swimming pool has been designed for private use only. Do not use for commercial activities. 
Avoid accidents and be prepared to react in case they occur! 

 

Summary of Contents for Barrica Series





















Reviews: