6
5. PART LIST (COMPONENTS)
COMPONENTS:
Remove and sort the components of the pool before starting installation
Ø
350x120
Ø
460x120
Ø
550x120
L
1
1
1
CH
1
1
1
TO
31
31
31
AR
31
31
31
TU
31
31
31
M
10
12
15
M2
10
12
15
LS1
86
116
139
LS2
2
2
2
LS3
1
1
1
LS4
2
-
-
PL
11
15
17
P
10
12
15
EMB
10
12
15
P2
20
24
30
C
2
2
2
SK
1
1
1
VR
1
1
1
PREPARE THE AREA BEFORE THE INSTALLATION
For this kind of pool we recommend to make a concrete platform. This platform should have the same size as the
pool diameter plus 30 cm. security. The surface must be
TOTALLY HORIZONTAL, WITHOUT DIFFERENCE.
VERY IMPORTANT:
Never assemble the pool on polystyrene plates or similar.
- We recommend to put on the ground a protective sheet, a rot-proof tapestry or Astroturf, to protect the liner from
breaks caused by the fret of the liner with the floor.
- Directly on the area, previously conditioned (see instructions here below), you will need the following tools:
A stake, a rope, a funnel (bottle), and some lime, flour or similar. Mark the area where the pool will be placed. For
major security, use gloves.
- Hammer a peg in the ground; in the centre of the area where you want your pool. Tie a string/rope to the peg
equal to the length of the radius of the swimming pool +30 cm, and mark a circle with a chalk or with a bit of lime
or flour and a funnel (or bottle) (fig.1).
- If you need to level
the floor, don’t fill in the holes. Dig away higher areas and level the ground with lower areas
(not the other way round). Anyway, it’s needed to remove roots, grass, stones, twigs… and any kind of sharp
objects (fig. 2 & 3)
- Level the ground with a rake or a table, covering the holes with sand (fig. 4).
- Keep on checking that the ground is levelled 100%, with a spirit level and a flat strip of wood. Level all the
surface in the same level tan the lowest place, filling in with fine sand. Level again. (fig. 5).
- And finally, place a thin layer of sieved sand throughout the surface. Spread the sand with a table and level it at
the same time. Flatten the area with a roller (fig. 6).
Summary of Contents for Barrica Series
Page 20: ...20...
