CruzPro MaxVu110, User Manual

Page: 31 / 68

Page 31
Display Configurations Area
The data being displayed, where it is displayed and the alarm limits for each
display is called a “Display Configuration”. The Display Configurations Area
shows 16 buttons numbered 1 to 16 corresponding to each of the 16 possible
display configurations. When you click on one of the 16 buttons all the informa-
tion in the “Current Display Configuration” area and the “ICONS” area will be
updated to show the correct information for that Display Configuration.
In addition to the 16 display configuration buttons, there are 5 buttons that will
clear or set all the icons for the current display configuration or completely clear
both the current display configuration and all the icons for the current display
configuration. The two remaining buttons in the Display Configuration area are
used to upload display configurations to the MaxVu110 and download display
configurations from the MaxVu110 (See “Uploading and Downloading Display
Configurations”).
Current Display Configuration Area
Data Sources: All the information that specifies what data sources to display in
each of the three digital displays and the two bar charts, the alarm limits and the
upper and lower bar chart limits are defined in the Current Display Configuration
area. Each of the three digital displays and two bar charts show what Data
Source is going to be shown on the MaxVu110 LCD. Clicking the
%
button in
one of these areas results in a pulldown menu listing all the Data Source options
available for that display as shown below. You can scroll through the list of up to
34 different Data Sources and select the item you wish to see.