RADIO REPLACEMENT
SWC RETENTION
+
+
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, C
A
91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.051619
3 of 7
DKFD-60L
Radio Replacement Interface with Steering Wheel Control Retention
with Dash Kit for FORD, LINCOLN & MERCURY
ANALOG CONNECTION:
WIRE VIEW
PINK
BLACK
Crux 24-Pin Connector
HOW TO DETERMINE IF THE VEHICLE HAS ANALOG SWC:
Analog Steering Wheel Control (SWC) signal vehicles will have
wires populated and line up to the PINK and BLACK wire on the
24-Pin Crux connector.
If one wire is missing then you will need to use Crux part number
SWRFD-60.
DIP SWITCH SETTINGS:
FORD STEERING WHEEL CONTROL DIP SWITCH SETTING:
RED to SWC Key 1
WHITE to SWC Key 2
SHIELD to SWC Ground
(included in kit)
AFTERMARKET RADIO DIP SWITCH SETTINGS:
SWC 3.5MM PLUG ADAPTER:
Use the supplied 3.5MM SWC Plug adapter for aftermarket radios that do not have a 3.5mm SWC jack.
RADIO BRAND: DIP: 1 2 3
4
Dual, Fahrenheit, Jensen, Pioneer
Power Acoustik, Soundstream
Alpine
Clarion
Kenwood
JVC
Boss, Old Sony
New Sony
OFF
OFF
ON ON
OFF
OFF
ON ON
OFF
OFF
OFF OFF
OFF
ON
ON OFF
OFF
ON
ON ON
OFF
ON
OFF ON
OFF
ON
OFF OFF
OFF OFF ON OFF
SWC MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
DIP: 5 6 7 8
Ford
OFF
OFF
OFF OFF
SWRFD-60L
SWC MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
NOTE: Insulate the Blue/Yellow and Green wires if not being used.
3.5MM SWC CABLE
Plug in the 3.5MM to 4-Pin SWC cable to the SWC module.
