16
Troubleshooting
AUTOMATIC OVERLOAD PROTECTION
The Blender is designed to automatically turn off if it begins to overheat, this is designed
to protect the motor, the motor will shut off and it could possibly emit a small odour this is
normal. If this occurs, follow these steps.
1. Turn the power off and unplug your Blender for at least 60 seconds to allow it time to
reset itself.
2. If the unit will still not operate leave the unit to cool for 45 minutes to reset, this time will
be extended if the room temperature is high.
To prevent your blender overheating follow these steps.
• Do not over-process, blending often takes seconds not minutes.
• Blend at the appropriate speed, longer blending on low can cause the unit to overheat.
• Use the tamper to aid the process of thicker mixtures and keep the ingredients moving
around the container.
Servicing
If you drop or damage your Blender it should not be used until it has been examined by a
qualified appliance technician. Always refer servicing to qualified service personnel.
SZ-314295_CRUX001 CRUX soupa IM_R3.indd 16
2017-05-31 9:19 AM