12
The Tamper
Only use the tamper provided with the unit,
do not use any other accessories as this
may damage the accessory and the unit.
To ensure the tamper is the correct one,
remove the lid cap and insert the tamper.
The tamper splash disk will rest on the lid
and the tamper will not come into contact
with the blades no matter how you move
the tamper around the container.
The Tamper should only be used in
conjunction with the blender lid.
The tamper splash disk stops the tamper
from hitting the blades during use.
The container should not be more
than 2/3 full when using the tamper;
otherwise it may cause the ingredients
to overflow.
Do not use the tamper for more than
30 seconds at a time during blending;
this is to reduce the chance of overheating.
If the food does not circulate, it may be
that there is an air pocket, remove the lid
cap and insert the tamper and move the
ingredients from side to side to free the air pocket.
Do not force it towards the bottom of the container.
Before First Use
Before first use clean the container and single serve beaker following the instructions
outlined in the Care and Cleaning section. Wash the lid, lid cap, tamper, and travel lid in
warm soapy water and rinse and dry thoroughly. Do not submerge the container into water
as this will damage the locking nut assembly. Wipe the base unit with a soft damp cloth to
remove any packing dust.
Tamper
Blade
Assembly
Lid
Tamper
Splash Disk
SZ-314295_CRUX001 CRUX soupa IM_R3.indd 12
2017-05-31 9:19 AM
