CRU WiebeTech Drive eRazer Ultra, User Manual

Page: 9 / 15

9
Protecting Your Digital Assets
TM
CRU WiebeTech Drive eRazer Ultra User Manual
• Use the Up or Down buttons to scroll through and view the following info about the drive.
MODE EXPLANATION
Capacity (bytes) Capacity of the hard drive, measured in bytes
Manufacturer Manufacturing company name of the hard drive
Model number Model number of the hard drive
Serial number Serial number of the hard drive
Firmware Rev Firmware revision number of the hard drive
HPA size (bytes) The size of the Host Protected Area of the hard drive, measured in bytes
DCO size (bytes) The size of the Device Configuration Overlay of the hard drive, measured in
bytes
Disk health Displays the S.M.A.R.T. health status of the drive
Secure Erase Nor time
Time reported by the drive that it will take to use Secure Erase (Normal)
Secure Erase Enh time Time reported by the drive that it will take to use Secure Erase Enhanced
Start/Stops S.M.A.R.T. information on how many times the drive has spun up and spun
down
Power Cycles S.M.A.R.T. information on how many power on/off cycles the drive has under -
gone
Bad Sectors Number of bad sectors reported by the drive
3.4 VIEW DOCK INFO
This screen displays information about your Drive eRazer Ultra unit.
• From the “Home/Start Erasing” screen, press the up or down buttons to get to the “View Dock Info”
screen. Press Enter .
VIEW DOCK INFO:
>
• Use the
Up
or
Down
buttons to scroll through and view the following info about Drive eRazer.
MENU ITEM CONDITION/EXPLANATION
Product Name Brand name of the product (e.g. “Drive eRazer Ultra”)
Unique ID# A specific, unique number assigned to the unit for identification, akin to a serial
number
Firmware ver. # Specific firmware version installed on the Drive eRazer Ultra product
3.5 OTHER SCREENS DURING THE ERASURE PROCESS
3.5.1 Operational Status
During erasure, status messages are displayed on the LCD. Examples are below.
STATUS MESSAGE CONDITION/EXPLANATION
STARTING ERASURE Briefly displays when a user first selects “Start Erasing” and then confirms that
selection
GATHERING INFO Briefly displays while the Drive eRazer Ultra is gathering information from the
drive and making calculations to determine such things as the presence of an
HPA or DCO
PREPARING ERASE Briefly displays while the Drive eRazer Ultra is checking user settings and plan -
ning the erase