4
Protecting Your Digital Assets
TM
CRU WiebeTech Drive eRazer Ultra User Manual
2 INSTALLATION STEPS
a. Attach the protective metal drive plate to your 3.5” hard drive. (This step is optional.) The purpose of the
bottom plate is to provide protection to your drive electronics and aid heat dissipation.
b. If you’re erasing an IDE/PATA drive, configure the jumpers on the rear of the drive. The drive must be set to
the Master setting. Consult the instructions for your drive. Some drives display configuration information on
the drive’s label.
c. Ensure that the Drive eRazer Ultra’s power switch is in the OFF (0) position.
d. Connect the Drive eRazer Ultra to the drive (or adapter) using either the IDE ribbon cable for IDE/PATA drives
or the SATA data/power cable for SATA drives.
e. If you’re using an adapter, connect the drive to the adapter.
f. Attach the power cable to the Drive eRazer Ultra and to the drive. For SATA drives, the power cable and data
cable are combined into a single SATA drive interface.
g. Plug the AC adapter into the Drive eRazer Ultra.
h. Turn on the power switch. The connected drive will power up and the Drive eRazer Ultra main menu will
appear on the LCD screen.
3 USING THE LCD INTERFACE AND MENU
Use the LCD and 4-button navigation interface to start erasing drives, adjust settings, view information about
the drive and dock, or check on operational status. On the 4-button navigation interface, “Up” and “Down” allow
scrolling through options, while “Right” selects and “Left” goes back to the previous screen.
3.1 HOME/START ERASING
Use this screen to begin the erasure process using current settings. “Quick Erase” is the default erasure
setting. Quick Erase uses all zeroes as the overwrite pattern.
START ERASING
QUICK ERASE >
WILL ERASE ALL
DATA >
ESTIMATING
ERASE TIME
ERASING. . . 2%
19 M REMAINING
When Quick Erase is finished, the Drive eRazer Ultra will verify a sample to ensure completion. See section
3.2.3 for more information on verification.
PREPARING VERIFY
VERIFY . . .2%
39M REMAINING
VERIFY
DONE >
REVIEW SETTINGS
>