background image

Crown Industrial Operators

213 Michelle Court
So. San Francisco, CA 94080
Phone (650) 952-5150
Fax (650) 873-1495
website: www.crown-industrial.com

GUARANTEE

If, within a period of one year from date of shipment, any part of a CIO 
Electric "Aut-o-doR" Operator is found defective due to poor materials 
or workmanship,  new parts will be furnished free of charge F.O.B. 
manufacturer’s plant, providing the equipment has been given normal 
and proper usage, lubrication, and maintenance and is still the property 
of the original purchaser and/or part of the original installation. 

THIS 

WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, 
EXPRESSED OR IMPLIED, AND THE MANUFACTURER MAKES 
NO IMPLIED WARRANTY OF  MERCHANTABILITY BEYOND THE 
EXPRESSED TERMS HEREOF. MANUFACTURER’S LIABILITY FOR 
DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES RESULTING 
FROM ANY SUCH DEFECTIVE PRODUCT IS STRICTLY LIMITED TO 

THE DELIVERY OF NEW PARTS, AS SET FORTH ABOVE.

Operator Serial Number  _______________________________    H.P.    ____________________________________

Supplied on Crown Industrial Operators Order Number  __________________________________________________

Power Supply  ____________   Volts  ___________   Hz  _______________   Phase  __________________________

Installed At   _______________________________  Date _______________________________________________

Notes   ________________________________________________________________________________________

  

________________________________________________________________________________________

  

________________________________________________________________________________________

  

________________________________________________________________________________________

  

________________________________________________________________________________________

MAINTENANCE INFORMATION

(To Be Filled Out By User)

G-2001

Crown Industrial Operators • 213 Michelle Ct. • So. San Francisco, Ca 94080-6202 

Phone: (650) 952-5150 • Fax: (650) 873-1495

www.crown-industrial.com Email: [email protected]

G-2001

7

Summary of Contents for 405DC-EC










Reviews: