background image

General 

The EDS-2000-AM is a unique motion detector utilizing a single (quad element) passive 

infra-red element and Microwave technology with antimask feature

 

for use outdoors in harsh 

environments.  

The EDS-2000-AM is designed for outdoor use in the most severe and climatic conditions and 

may also accommodate pets with the addition of optional pet immunity lenses. 

High reliability is achieved by combining both dual tech hardware with highly sophisticated 

software, greatly reducing the possibility of false alarms. 

The active elements are comprised of a single (quad element) PIR and advanced Microwave 

detector inside a stylish, rigid plastic body.  

These special optics combined with a Microwave 

Doppler sensor assures elimination of “false 

alarms” while maintaining high security standards for the detection of human intruders into the 

protected area. The detection sensitivity and range is controlled by a potentiometer allowing 

fine tuning, so that the correct detection pattern will be set for every installation. 

The EDS-2000-AM is designed to protect large areas and can easily be installed on walls in 

order to provide a solid protection of the area while rejecting interferences from birds and small 

animals with the optional 

“PET MASK” optics. 

Features 

  Microwave detection based on Doppler concept.

  Installation height is 1.2m (Grade 3) or 2.1m (Grade 2)

  PIR sensitivity adjustment.

  MW intensity selection.

  Temperature compensation.

  Microcontroller signal processing.

  Anti mask mechanism (for PIR lens).

  Front and back tamper protection.

  Unique waterproof and sealed plastic design.

  Detection Range: Grade 2 - Up to 12m; Grade 3 - Up to 8m.

  Detects human intruders walking or running.

  No maintenance required.

  High RFI/EMI Immunity.

  Protection from: direct sunlight, wind up to 30 m/sec, snow and rain, small animals, removal

of top cover and removal from mounting bracket (Tampers). 

Summary of Contents for EDS-2000AM



















Reviews: