14
8.4 Indications setting
The EDS-2000-AM has 3 LEDs that each points at different indication:
a. Green LED indicates PIR detection.
b. Yellow LED indicates MW detection.
c. Red LED - alarm indication (logic AND of both MW and PIR).
d. Masking indication: Yellow LED blinking
e. Fault indication: Yellow LED blinking
The installer has an option to control LEDs operation, using the LED control on SW2
position 1, between
“ON” and “OFF”. Or by apply 9-16v to terminal block position 3 ("test")
•
Place the top cover to the base and close it
using the bottom screw.
