BA_Migros_GB_s1bis32 11.02.2009 12:49 Uhr Seite 9
Probedruck
9
Before the first start-up:
Your cycle was tested several times during manufacture and
subjected to a final control. Since during transportation of the
cycle the settings can change, please check the following without
fail before each ride:
Info:
– Proper mounting of the wheels and quick release levers.
– The minimum insertion depth of handle bar stem and seat
support and their mounting.
– Effectiveness and adjustment of the brakes.
– Adjustment and bolting of the spring components.
– Function of the gear and the lights.
– Safe seat of all screws, nuts and the pedals.
– The air pressure and the profile depth of the tyres.
Regular inspections
Check periodically, e.g.,
after 300–500 km
or every 3–6 months,
depending on the intensity of use of the cycle to ensure that
all screws, nuts and the quick release are fixed properly. Check
or service for the first time after approximately 100 km. Checks
or servicing is thereafter necessary at regular intervals. The
indicated amount of kilometres gives only a rough orientation.
You have to take into account the use pattern and the number
of kilometres driven in rain. In addition to the jobs that you
undertake during the regular inspection, please
– Clean cycle and oil moveable components.
– Treat paint rub-offs and rusted areas.
– Apply protective coating on metal parts.
– Replace non-functional or damaged parts.
IMPORTANT NOTE: Caution!
To be able to undertake
all the jobs on your cycle on your own, you will need
some experience, suitable tools and skills. While
tightening the screws, please pay attention to the
correct tightening torques. These are given on Page
22 of this Operating Instructions or in the
instructions of the component manufacturers.
Difficult and safety-related jobs are better to be
done by an expert.
English
Pedelec with Lithium-ion battery
