BA_Migros_GB_s1bis32 11.02.2009 12:49 Uhr Seite 31
Probedruck
31
Now loosen the two axle nuts. You can now separate the
remaining parts from the fork (Figure 25). The axle nut, the
base plate, two 3mm spacer disks and the torque supporting
washers remain connected with the plug of the motor cable on
the right side. Do not dismantle further. The front wheel can
now be taken out and any tyre, hose or spoke damages can now
be rectified.
Assembly:
Insert the front wheel and place the torque protection washers
on the hub axle inside the fork, and put the spacer disks and
the base plate of the cover back at the right position. Give a
few turns to the axle nuts. Align the front wheel and tighten
the axle nuts.
Connect the plug-in connector. The position of the two plug-
in connectors is determined by the cable lengths. In any case,
try to restore the previous arrangement. (Figure 24)
Now replace the cover. Check that the cable and the plug-in
connector lie neatly under the cover without any substantial
pressure.
Insert the two cover holder screws and tighten them.
Battery return / recycling
Please do not dispose the battery pack with other household
garbage. Appropriate containers have been provided by the
battery industry as well as the community collection centres for
the proper disposal of batteries.
If you want to send a battery
pack, please talk to your dealer,
because Lithium-ion batteries
cannot be shipped without
labelling
5
.
Please also observe the
instructions printed at the
bottom of the battery:
5 Lithium ion batteries are classified as hazardous substances due to their Lithium content,
which is chemically very reactive. They are therefore subjected to mandatory accident
safety tests in the development phase, which ensure that an external destructive impact
does not trigger any uncontrollable processes. The correct labeling on dispatch packages
e.g. helps the fire brigade to decide which fire extinguishing system should be used in
case of car accident. Certain cell structure technologies and a protective circuit ensure
that no electrical overloads occur during normal operation.
English
Pedelec with Lithium-ion battery
