BA_Migros_GB_s1bis32 11.02.2009 12:49 Uhr Seite 32
Probedruck
Faults / Cause / Remedy
Technical data of CROSSWAVE Pedelec
1. Operating unit
1.1 No LED lights up at the left on activating the Pedelec
Cause:
Remedy:
Battery is not inserted properly
> Re-insert battery
Fault in battery
>Contact dealer
Cable / contact fault
> Contact dealer
Electronic circuit is defective
> Contact dealer
1.2 The Pedelec switches off during the drive
Cause:
Remedy:
Battery is empty
> Recharge battery fully
Electronic circuit is defective
> Contact dealer
Plug-in connection has disengaged
> Contact dealer
2. Battery
2.1 No LED lights up on pressing the battery charging status display switch
Cause:
Remedy:
Battery is empty
> Charge the battery fully.
Fuse in the battery is defective
> Replace fuse
Cells in the battery pack are defective
> Contact dealer
2.2 The capacity of the battery has come down drastically
Cause:
Remedy:
The battery is used-up (old)
> Replace the battery
The charging device is defective
> Contact dealer
Charging plug / charging cable is damaged
> Contact dealer
3. Motor
3.1 The motor does not run, but the operating elements and the battery function
Cause:
Remedy:
The motor cable is covered
> Check plug, it is not inserted
properly
Other cable / contact fault
> Contact dealer
Pedal sensor is defective
> Contact dealer
Electronic circuit is defective
> Contact dealer
4. Pedal sensor
4.1 The motor does not work, but the operating elements and the battery function
Cause:
Remedy:
Direction of pedal sensor is incorrect
> Contact dealer
Pedal sensor is defective
> Contact dealer
5. Charging device
Refer to Chapter
"Charging the drive battery"
or Item 2.2 of this list
Pedelec/EPAC
6
(Electrical Power Assist Cycle) Extra
cycle drive with 250W motor, up to 25km/h,
activated via Pedal rotary sensor.
BLDC gear - motor. The full form of BLDC is
Brushless-DC i.e., a brushless electronically
commuted 3-phase DC motor, works with max.
250W steady nominal power.
BLDC motor controller with digital program control
according to Euro standard 2 Drive modes: Normal
and Eco. The auxiliary drive is activated
automatically on using the pedals and supports
up to 25km/h. The auxiliary drive is shut down
automatically on applying the brake. The driving
power is limited in the ECO mode.
25V x 11Ah = 275Wh Lithium-ion battery of
European manufacture with 5 LED capacity display,
weight 2.4 kg, up to 500 charging cycles or 3-4
years life expectancy under optimum use conditions.
CC-CV charging device with 2.5A charging current
full charging of 11Ah battery lasts about 6 h.
Depends predominantly on the selected drive mode,
personal driving style and other factors – 35-50km
in the Normal mode – 60km in the Eco mode Refer
to Chapter "Mileage and its factors".
Drive system
Motor
Control
Battery
Charging device
Mileage
6
EPAC = Pedelec
Operating instructions
32
