FMUX/S-4E1-E2 Multiplexer
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567
Copyright © 2007 Cronyx
32
'Ports loop' menu
The
'Ports loop'
menu is designed to control E1 port loops:
Port loopback
Mode: Normal; Sensor=Open
Link: Ok
1. E1 port 0 loop: Disabled
2. E1 port 1 loop: Disabled
3. E1 port 2 loop: Disabled
4. E1 port 3 loop: Disabled
Command: _
'E1 port 0...3 loop'
– loop control on E1 ports. When a loop is 'Enabled', data received
from the port are turned back.
'Tributaries loop' menu
The
'Tributaries loop'
menu is designed to control E1 port tributary loops:
Tributary loopback
Mode: Normal; Sensor=Open
Link: Ok
1. E1 port 0 tributary loop: Disabled
2. E1 Port 1 tributary loop: Disabled
3. E1 Port 2 tributary loop: Disabled
4. E1 Port 3 tributary loop: Disabled
Command: _
'E1 port 0...3 tributary loop'
– tributary loop control on E1 ports. When the loop is
'Enabled', data received for the port from the link are turned back. The AIS signal is
output to the corresponding E1 port.