FMUX/S-4E1-E2 Multiplexer
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567
Copyright © 2007 Cronyx
28
Under the
'-Errored seconds-'
message, column headings are located:
•
'Receive'
– the number of seconds, during which frame synchronization has been lost
in the link;
•
'Transmit'
– number of seconds, during which transmitter errors have been detected.
4.4. 'Port statistics' menu
The '
Port statistics
' mode is used for viewing current information, link operating modes
and statistic counters.
Port statistics: Session #6, 0 days, 5:17:01
Mode: Normal; Sensor=Open
Link: Ok
E1 port 0: Receive level=-0dB
E1 port 1: Receive level=-0dB
E1 port 2: Receive level=-0dB
E1 port 3: Unused
-Errored seconds-
CV
Receive Transmit Status
E1 port 0:
0
0
-
Ok
remote:
0
0
-
Ok
E1 port 1:
0
0
-
Ok
remote:
0
0
-
Ok
E1 port 2:
0
0
-
Ok
remote:
0
0
-
Ok
C - clear counters, R - refresh mode, any key to break...
The information on the screen is updated once per three seconds. To return to the upper-
level menu, you must press <Enter> (or <Return>). Press 'R' to toggle the imposition
mode. In the imposition mode the screen will not be cleared when information is updated.
To reset the statistics counters to zero, press 'C'.
The '
Port statistics
' line contains the current session number and time passed from switching
on or restarting the multiplexer. The session number is incremented after each restart of
the device.
The lines from the upper part of the screen –
'Mode'
and
'Link'
– are described in the
'Upper level menu' section.
