1
Modem-Converter E1-L/S
© 2006 Cronyx
Figure below shows the front panel of the device ordered with Ethernet 10/100Base-T
digital port and identifies connector locations:
Alarm Port
Console Port
E1 Link
Power
GND
SNMP Port
PWR TST
PORT 0
LINK 0
SNMP
CONSOLE ALARM
Ethernet 10/100Base-T Port
Power Connection
AC power (for the «-AC» version) is supplied to the device through a standard AC power
connector (IEC 320 C14). The power cable is supplied with the device.
The DC power connector (for the «-DC» version) is shown below (view from the front
of the device):
The 3-screw removable terminal block is supplied with the device.
Ground Terminal
An M4 grounding screw is located on front panel of the device.
Before powering the device on and before connecting other cables, the mo-
dem unit must be properly grounded.
Summary of Contents for E1 - L/S
Page 50: ...50 Modem Converter E1 L S 2006 Cronyx ...
Page 51: ... 2006 Cronyx 51 ...
