Crommelins Cromtech 7000ie, Operation Manual

Page: 7 / 21

11 10
Engine Switch
OFF
ENGINE SW.
ON
This switch controls ignition system, fuel system, power
system and solenoid valve.
OFF Stop the engine: Ignition system is in the closed state,
fuel switch is off, solenoid valve switch is off, and power
system switch is off; the engine can’t be started normally.
ON Start/run the engine: Ignition system is in the working
state, fuel switch is on, solenoid valve switch is on, and
power system switch is on. The engine can be started by
the Start Button, the Recoil Starter or the Bluetooth App.
Start Button
START ____________
STOP
ON
OFF
When the engine switch is placed in the “ ON ” position, use
the Start Button to start the engine.
Recoil Starter
When battery voltage is too low or flat, use the manual recoil
starter to start the engine.
ESC Throttle Switch
ESC THROTTLE
STANDARD
TURBO ECO
1 2 3
① “ECO”
When the ESC switch is turned to “ ECO ”, the economy
control unit controls the engine speed according to the
connected load. The results are better fuel consumption
and less noise.
② “STANDARD”
When the energy saving switch is placed in the
“ STANDARD ” position, with load less than 4.5kW, the
engine runs at the rated speed (3,100r/min).
③ “TURBO”
When the energy saving switch is placed on the position
of “ TURBO” the engine runs at the rated speed (3,600r/
min) regardless of whether the load is connected or not.
NOTE: When high current devices are applied, such as air
conditioners, hotplates or water pumps,
ESC Throttle
must
be placed in the “ TURBO ” position.