Crivit 355244 2004, Operating Instructions Manual

Page: 16 / 46

18
• Ventilate the exercise room suffi-
ciently but beware of draughts.
• Warning! The product must
not be used by people
who have a pacemaker!
Risk of electric shock!
• Do not open the case, leave that
to the repair specialists. Contact a
specialist repair workshop for this.
Liability and warranty claims are
excluded for repairs that are inde-
pendently carried out, improper
connection or incorrect operation.
• Only use the product indoors.
• Always turn off the product when
you are not using it or when you
are cleaning it or if a malfunction
occurs.
• Never pour liquid into the product
or the computer.
• Do not use steam cleaners to
clean the product. This could dam-
age the product.
Extra caution – risk of
injury to children!
• Keep children away from the
packaging materials. There is a
risk of suffocation!
• Children must not be allowed to
play with the product.
• The product is not suitable play
equipment and must be stored
somewhere that is inaccessible to
children when not in use. To elimi-
nate the risk of injury, the product
must not be within reach of chil-
dren during the workout.
• Cleaning and maintenance must
not be carried out by children
without supervision.
• Point out to children specifically
that the product is not a toy.
Dangers due to wear and
tear
• The product may only be used if it
is in perfect condition. Check the
product for damage or wear be-
fore each use.
• The safety of the product can only
be guaranteed if it is regularly in-
spected for damage and wear.
If for example the V-belt or han-
dles show signs of damage, cease
using the product.
• Use only original replacement
parts.
• Protect the product from extreme
temperatures, sun and dampness.
Improper storage and use of the
product could lead to premature
wear and tear, and possible
breakages in the structure, which
could result in injuries.
• Check the product regularly for
damage or deterioration.
• Do not use the product anymore if
it is damaged.
• Do NOT permanently screw or
fasten the product to the floor.
Non-compliance can cause con-
siderable damage to the device.
• Tighten the screw connections reg-
ularly.
• Ensure that defective parts, e.g.
connecting parts, are replaced
immediately and by a specialist
only. Only use the product again
once all defective parts have been
replaced.
• Check the product regularly for
visible signs of wear and damage.
Check the screwed connections
regularly. Only use the product if it
is in perfect condition!
Battery warning notices!
• Remove the batteries when they
are flat, or if the product is not in
use for an extended period.
• Do not use different types or
brands of battery or new and used
batteries together or batteries with
different capacities as these can
leak and cause damage.
• Ensure the polarity (+/–) is correct
when inserting the batteries.
• Replace all batteries at the same
time and dispose of the old batter-
ies as prescribed.
• Warning! Batteries must not be
charged or reactivated by other
means, taken apart, thrown into
fire or short-circuited.
• Always keep batteries out of reach
of children.
• Do not use rechargeable batteries!
• Cleaning and maintenance must
not be carried out by children
without supervision.
• Clean the battery and device
contacts as needed and before
inserting.
• Do not expose the batteries to ex-
treme conditions (e.g. radiators or
direct sunlight). Otherwise there is
an increased risk of leakage.
• Batteries can be life-threatening if
swallowed. Therefore, store batter-
ies in a place inaccessible to small
children. Medical attention must
be sought immediately if a battery
is swallowed.
Danger!
• Handle damaged or leaking bat-
teries with extreme caution and
dispose of them properly as soon
as possible. Wear gloves when
doing so.
• If you come into contact with bat-
tery acid, wash the affected area
with soap and water. If battery
acid gets in your eye, rinse it with
water and seek medical attention
immediately!
• The connection terminals must not
be short-circuited.
Assembly
The product should be assembled by
two people.
Take care with floors that are suscepti-
ble to damage! Use a mat or the like, if
necessary, to protect the floor.
Step 1 (Fig. B)
1. Stand the base frame (1) on a solid, level
floor. Warning: to protect the floor from
being scratched, cover it with a suitable
material.
2. Screw the front foot (2) onto the front side
of the base frame with two screws (17),
two lock washers (18), two washers (19)
and two cap nuts (20).
Note: make sure that the transport wheels on
the front foot (2) are pointing forward.
3. Screw the back foot (3) onto the back side
of the base frame with two screws (17),
two lock washers (18), two washers (19)
and two cap nuts (20).
GB/IE