- 59 -
Alarm
ALARM
ALARM
ALARM
ALARMA
Press and hold
SET
for 3 seconds to enter setting mode.
"AL" will appear on the display and the minutes of the alarm time will blink.
Press
SEL
to set the minutes and press
SET
to confirm your setting. Set the hours in
the same way.
You may optionally set the month and day as well.
If neither month nor day are set the alarm will sound daily. If the day is set, the
alarm will sound monthly. If both the month and the day are set the alarm will
sound only at the set date.
The hourly chime setting will now appear on the display
CHIME
STDALARM
SIGN HOR
HORA AL
Press
SEL
to select a setting and confirm your setting by pressing
SET
(
ON/EIN/ACTIF/ENCENDID
=on,
OFF/AUS/INACTIF/APAGADO
=off).
If the chime is activated, the bell symbol will appear and the watch will chime at
the beginning of every hour.
Exit setting mode by pressing
MODE
. The alarm can be activated or deactivated
by pressing
SET
. If the alarm is activated the alarm symbol
will appear.
When the alarm sounds, press
SET
,
SEL
or
MODE
to stop the alarm.
Snooze feature
If no button is pressed when the alarm sounds, the alarm will shut off after 30
seconds and the symbol
will blink on the display. The alarm will stop and will
resume after sounding after 2 minutes. The process will repeat itself 5 times.
Timer (max. 23:59:00)
TIMER
TIMER
COMPTE
TIMER
Press and hold
SET
for 3 seconds to enter setting mode.
The minutes of the timer time will blink on the display.
- 60 -
Press
SEL
to set minutes of the timer time and confirm your setting by pressing
SET
.
Set the hours in the same way.
Now the additional settings for the timer will follow. Press
SEL
to select the desired
mode:
Cd r
After reaching 0:00 the timer will count the set time again
Cd U
After reaching 0:00 the timer will count forward
Cd S
After reaching 0:00 the timer will stop
Exit setting mode by pressing
MODE
.
The timer can be started or stopped by pressing
SET
.
Press and hold
SET
to reset the timer.
After the timer time is up an alarm will sound.
Stop watch
Press
MODE
to select the feature before proceeding.
CHRONO
ST-UHR
CHRONO
CRONO
Press
SET
to start or stop the stop watch. Press
SEL
while the stop watch is running
to record a lap time. Up to 99 laps can be recorded.
Press and hold
SET
to reset the stop watch.
Memory feature
DATA
RECALL
ANSICHT
DATEN
APPEL
DONNEES
RECUP
DATOS
Press
SEL
while the stop watch is stopped to display the fastest lap on the display.
Press
SET
to display the other lap times.
Please note
: The memory feature can only be used if at least one lap time was
recorded.
Heart rate measurement
Press
MODE
to select the feature before proceeding.
- 61 -
HRM
PULS
FC
PULSO
The subfeatures of the heart rate measurement can only be used when the chest
belt is connected.
Press
SEL
to access the subfeatures of the heart rate watch.
Timer
TIMER
TIMER
COMPTE
TEMPORIZADOR
Memory feature
MEMORY
SPEICHER
MEMOIRE
MEMORIA
Target heart rate
ZONE
BEREICH
ZONE
ZONA
Calories, fat burn and BMI
CALORIE
KALORIEN
CALORIES
CALORIAS
Fitness
FITNESS
LEVEL
FITNESS
LEVEL
NIV FORM
PHYSIQ
NIVEL
FIT
In the middle row of the display the heart rate is shown while wearing the chest
belt. If the signal is received from the chest belt the heart symbol will flash. To the
right of the heart rate the heart rate in percent of the maximum heart rate is shown.
The maximum heart rate is calculated by evaluating your age, weight and height.
- 62 -
Warning light
If your heart rate reaches or exceeds 99% of
your maximum heart rate, or your heart rate
exceeds the target zone values (see target
zone) the red warning light will blink and an
alarm will sound.
Timer
TIMER
TIMER
COMPTE
TEMPORIZADOR
The bottom row of the display will show the elapsed training time. The middle row
will show your heart rate and the heart rate in percent of the maximum heart rate.
The timer will start automatically when the chest belt starts measuring the heart
rate. The timer will continue counting the time if the feature mode of the watch is
changed.
Press
SET
to select the timer mode:
TIMER
total training time
training time in heart rate target zone
▲
training time with heart rate over target zone
▼
training time with heart rate below target zone
Press and hold
SET
to reset the training time.
Summary of Contents for 1-LD3814
Page 25: ...IAN 47584 ...
