background image

 

F

IBER

S

CAN

ONE

 

 

Dear Customer, 

 
Thank you for your confidence in choosing 

FiberScanONE™. 

This consistency meter is the fruit of a research lasted over 5 years on 
microwaves engineered to read water density, and over 10 years of microwave 
technology developments, started with our 

PresScan™

 press fabrics moisture 

meters. 
The 

FiberScan

™ research involved our labs, Universities, Excellence Research 

Centres and many Engineers using daily our drainage meters, who endlessly 
helped us to finely tune the instrument. 
The results: for the first time dangerous and critical ionising radiation 
equipments were replaced forever by a harmless, easy to handle and 
transport, microwave meter. 

FiberScan™

 was born. 

FiberScan™

 changed forever the technologies and principles of the drainage 

meters, setting what is now a standard in the PMC Industry. 

 

Today, 

FiberScan™

 advantages are so obvious that it’s advanced technologies, 

protected by multiple patents, are in the research sight of companies 
producing PMC instruments. 
We carefully listen to our customers, and implement constant improvements in 
our products. This attention led to the development of the 

FiberScanONE™

 

version, with new advanced features: 
- Lighter 

weight, 

FiberScanONE™

 is the lightest consistency meter on the 

market; 

-  Control unit completely integrated in the instrument, more balanced to use; 
-  Telescopic pole extended to 1,56m; 
-  Water thickness readable in excess of 48mm, the highest ever for a 

microwave consistency meter, no limits of measurement on machines 
producing pulp or linerboard; 

-  New user interface and graphical functions: display of the drainage survey 

trend on board the instrument, possibility to scan and show CMD mass 
profiles; 

-  Hybrid ceramic/plastic foil; 
-  HostXL™ fully integrated database software, for the display and printing of 

the drainage & retention profiles; 

-  Smaller and lighter transportation case. 
 
For any information or suggestion on the use of the instrument, please feel 
free to call our direct line @ +39 035 715282, or send an e-mail to 
[email protected]
 

Thank you, 

The FiberScan™ Development Team 

 

FiberScanONE™ User manual rev. 1.0.2   

 

 

  

 

      Page 2 of 74 

   

   

        

    

  

   

Summary of Contents for FiberScanONE











































































Reviews: