background image

OPTION PROGRAMMING cont. 

 

7. EXTENDED HORN CHIRP 

This option allows the unit to provide a slightly longer lock/unlock horn chirp output.  This option is ONLY required on 
specific vehicles where the normal horn chirp is not long enough to activate the factory horn and produce a chirp. 

 

OPTION RESET PROCEDURE: 

Programmable Options can be instantly restored to Factory Default Values (*): To restore default values, perform step 
#1 on page 8, then just press button #3 (Trunk) on the remote.  Parking lights should flash 4 times.  Turn OFF Ignition.  
All programming options should be restored to * values (See chart page 8). 

 
 
 

OPERATION 

 

REMOTE LOCK 

#3

#1

#2

#4

PANIC

TRUNK

PANIC

LOCK

UNLOCK

REMOTE

POP

 

To lock the doors, press the #1 (Lock Symbol) button on the 
transmitter.  You will hear a single horn chirp (if horn chirp enabled), 
lights will flash once and LED will begin flashing.  Optional:  If starter 
disable is installed, it will become active. 

 

REMOTE UNLOCK 

To unlock the doors, press the #2 (Unlock Symbol) button on the 
transmitter.  You will hear 2 horn chirps (if horn chirp enabled) and the 
lights will flash 2 times.  Optional starter disable will turn off. 

 

DRIVER’S DOOR UNLOCK  (OPTIONAL) 

Press the #2 Unlock button (Unlock Symbol) a second time to unlock remaining door or doors if this feature is installed 
on your particular vehicle. 

 

REMOTE PANIC PROTECTION 

To sound the panic alarm in an emergency situation or to draw attention to your vehicle press and hold Button #4 
(Panic) for at least 2 seconds.  The horn will begin to pulse and parking lights will flash for up 45 seconds or until the 
Panic Button on the transmitter is pressed to reset this mode. 

 

TRUNK / HATCH POP (REMOTE AUX. OUTPUT 1, OPTIONAL) 

To pop the trunk (Optional), press Button #3 (Open Trunk Symbol) on the transmitter for at least 2 seconds.

 

 

2

nd

 AUX. OUTPUT (REMOTE AUX. OUTPUT 2, OPTIONAL) 

To activate the Second auxiliary output press and hold Button #1 (Lock) and hold for more than (1) second.  This 
output can be used to control other optional add-on accessories such as a Remote Engine Start Module. 

 
 
 
 

Summary of Contents for CS-845.RKE.II













Reviews: