background image

OPTION PROGRAMMING cont. 

 

PROGRAMMING OPTIONS CHART   

 

 

* = DEFAULT SETTING 

 

Option #  Option Description 

Selection 

Lock Button 

Unlock 

Button 

1. 

Auto Lock & Unlock with Ignition  ON or OFF 

ON* 

OFF 

2. 

Double Unlock Pulse 

ON or OFF 

OFF* 

ON 

3. 

Horn Chirp 

ON or OFF 

ON* 

OFF 

4. 

Lock/Unlock Pulse Time 

0.8 Sec. or 3 Sec. 

0.8 Sec.* 

3 Sec. 

5. 

Passive Starter Disable 

ON or OFF 

OFF* 

ON 

6. 

Ignition Trigger 

ON or OFF 

OFF* 

ON 

7. 

Extended Horn Chirp 

Normal or Extended 

Normal* 

Extended 

 
 

1. AUTOLOCK / UNLOCK WITH IGNITION 

Controls whether the doors will automatically lock when the ignition is turned on and will unlock when the ignition is 
turned off.  

Note:  When Separate Driver’s Door Unlock feature is installed, only driver’s door will unlock when 

IGN. is turned off. 

 

2. DOUBLE UNLOCK PULSE 

The unit will send 2 unlock pulses when the #2 Unlock button is pressed.  This feature may be required for interfacing 
this system into specific Nissan, VW, Toyota, and Lexus vehicles that require 2 unlock pulses to unlock the vehicle. 

 

3. HORN CHIRP CONFIRMATION 

This option turns the horn chirps for lock/unlock on or off. 

 

4. DOOR LOCK/UNLOCK PULSE TIME 

Controls the amount of time (0.8 sec. or 3 sec.) for the lock/unlock pulse.  The 3 sec. setting may be required for 
1980’/90’s European Vehicles that require a long pulse to operate electric vacuum type door lock systems. 

 

5. PASSIVE STARTER DISABLE OUTPUT (Applies to OPTIONAL starter disable feature) 

This option modifies the unit’s (-) Negative Armed Starter Disable output operation.  When this option is turned ON, the 
unit will PASSIVELY activate the Starter Disable 45 seconds after the ignition is turned off.  Starter disable output is 
deactivated through the remote when unlocking the vehicle or a manual override. 

 

6. IGNITION TRIGGER 

This option controls the unit’s optional Ignition trigger feature. If selected to ON, then the vehicle’s horn will honk if an 
unauthorized operator turns on the Ignition after the vehicle had been locked with the remote.  This function is similar 
to an alarm system.  To avoid a trigger, use the remote for BOTH LOCKING and UNLOCKING the vehicle.  If system 
accidentally triggers, press button #4 to reset. 

 

Summary of Contents for CS-845.RKE.II













Reviews: