Installation Insert Page 3
1234
1234
1234
1234
1234
PINK WIRE - Positive Output for
LED
BLUE WIRE - Negative Instant Trigger
RED WIRE - Constant 12 Volts Positive
WHITE WIRES - Output To Parking Lights
BLACK WIRE -
Connect To Ground
ORANGE WIRE - Ground Output While Armed
BLACK ANTENNA WIRE-
Do Not Connect To Anything
- Stretch Out and Secure
GRAY WIRE - Valet/Override Switch
12345
12345
12345
12345
12345
Wiring Diagram
Shock
Sensor
Adjust
See Installation Insert Page 10 for
combination holder instructions
YELLOW WIRE -
Ignition 12
Volts Positive
Relay
Optional
Starter
Interrupt
Ground
both
Black
wires
Installation Insert Page 10
Although the Crime Guard 250i6 can have basic operations without them, the
Valet/Override Switch and the Status Indicator Light greatly enhance the system.
The Valet/Override Switch allows disarming the system without the transmitter
and placing the system into a state in which it cannot be armed. The Status
Indicator Light visually and quickly shows in which state the system is in.
Valet/Override Switch: Use the combination holder, or otherwise use the self-
adhesive pad to mount the Valet/Override Switch in a hidden but accessible
location. The control module and siren assembly’s Gray wire must be routed to
the Valet/Override Switch’s mounting location.
Snap the combination holder bot-
tom half to the upper half; ensure
that the wires are routed carefully.
The upper half of the combination
holder may be mounted with the
two screws provided, or, double-
sided adhesive tape
may be used.
Then, when the upper half holder
is secured, insert the LED and
mount the Valet/Override Switch
using its double-sided adhesive
tape.
☞
LED
Valet/Override
Switch
Summary of Contents for Crime Guard 250i6
Page 2: ......
