background image

Once Armed, If the System is Activated:

Page  7

System  Armed & Activated

Once the system is in an armed state it monitors all protected zones, and if an
intrusion attempt is detected it will activate, or “trigger”.
An activation consists of the following:

• The siren will start sounding.
• The exterior parking lights, if connected, will flash on and off repeatedly.

An activation has a 30 second duration (or, optionally 60 seconds) unless the
system is disarmed using the transmitter or the Valet/Override switch. If all
protected zones are secure at the end of the activation, the system will stop and

In addition to detecting impacts to the vehicle and detecting a current draw from
the battery (example- interior light illuminating from opened door), the 250i6 has
a detection circuit which may be used to protect the hood, trunk or doors.  If this
circuit is in a violated state when arming the system, the confirmation will be
three chirps instead of one.  The system will still arm, but it will bypass the open
zone until the zone is secured; once secured, this zone is protected.

mode, and chirps made during the programming of features or transmitters.

4. Parking Light Illumination Upon Disarming: (On / •Off)

- This feature configures the system, upon its disarming, to either flash the

parking lights 2 times, or to flash the parking lights twice and then turn them
on for 30 seconds.  This feature makes it safer to approach the vehicle when
disarming it at night by illuminating the area around the vehicle.

5. System Activation Cycle Duration: (•30 / 60 Seconds)

- This feature configures the system’s activation cycle to be either 30 seconds

or 60 seconds in duration before it automatically resets itself.

6. Shock Sensor Prewarning On or Off: (•On / Off)

- This feature turns on or off the prewarning only part of the shock sensor

operation.  If prewarning is turned off, the “hard impact” part of the shock
sensor is still fully operable.

When programming these features, as described on the following pages, features
are turned “on” by pressing the transmitter’s “Arm” Button, and “off” by pressing the
transmitter’s “Disarm” Button.  For feature #2, press “Arm” for “3 Seconds”,
“Disarm” for “3 Minutes”; and on feature #5 press “Arm” for “30 Seconds”, and
“Disarm” for “60 Seconds”.  Please see the following pages for more details.

Page  18

Summary of Contents for Crime Guard 250i6



















Reviews: