GLASS DRILL INSTRUCTION MANUAL
PRODUCT MANUAL
crlaurence.com
C.R. Laurence Co., Inc.
•
2503 E. Vernon Ave., Los Angeles, CA 90058
•
1.800.421.6144
•
crlaurence.com
NOVEMBER 2020
P. 6
1 . SAFETY PRECAUTIONS FOR HOT MELT APPLICATOR EQUIPMENT (CONT.)
1.4 Emergency Power Disconnect
In the event of a malfunction, turn off power to the equipment at the power off switch and remove source power to the
system at the nearest main disconnect.
1.5 Follow Directions
Read the product manual thoroughly before installation, operation or maintenance. Failure to do so can result in a serious
accident or equipment malfunction. The manufacturer will not be held liable for injuries or damage caused by misuse of
this equipment.
1.6 Safety Symbols and Signal Words
The following safety symbols and signal words are used throughout the manual and on the product to alert the reader and
operator to personal safety hazards or to identify conditions that may result in equipment or property damage.
General Safety Symbols
Specific Symbols and Signal Words
Other Product Symbols
The manufacturer reserves the right to make design changes for product improvement. This manual may not
reflect all details of these improvements.
2
SS96 Hot Melt Unit 19600-135 Rev. B 10/26/00
1.6 Safety Symbols and Signal Words
The following safety symbols and signal words are used throughout the
manual and on the product to alert the reader and operator to personal
safety hazards or to identify conditions that may result in equipment or
property damage.
General Safety Symbols
Specific Symbols and Signal Words
Other Product Symbols
The manufacturer reserves the right to make design changes for product
improvement. This manual may not reflect all details of these
improvements.
DANGER:
Indicates
a hazard, which, if not avoided, will result in serious
injury, including death, or equipment and property damage.
PE
+
-
On
Tank
Set Temp
Tank Heater
Off
Heated Hose
Standby Temp
Alarm
Ground
Applicator
Overtemp
Actual Temp
Protective Earth
Pump Motor
Adhesive Flow
Source Power
Valve Group
Manual Task
Input
Output
WARNING:
Indicates a hazard, which, if not avoided, can result in
serious injury, or equipment and property damage.
CAUTION:
Indicates a hazard, which, if not avoided, can result in
minor injury, or equipment and property damage.
DANGER:
High Voltage. Can cause serious injury, including
death. Disconnect electrical power at external source before
servicing.
WARNING:
Hot Surface. Can cause serious injury and burns.
Wear heat resistant clothing, gloves and safety goggles.
WARNING:
Disconnect electrical power at external source.
Failure to do so can cause electrical shock.
WARNING:
High Pressure. System contents under pressure. Can
cause serious injury and burns or equipment and property
damage. Relieve pressure before servicing.
!
!
!
2
SS96 Hot Melt Unit 19600-135 Rev. B 10/26/00
1.6 Safety Symbols and Signal Words
The following safety symbols and signal words are used throughout the
manual and on the product to alert the reader and operator to personal
safety hazards or to identify conditions that may result in equipment or
property damage.
General Safety Symbols
Specific Symbols and Signal Words
Other Product Symbols
The manufacturer reserves the right to make design changes for product
improvement. This manual may not reflect all details of these
improvements.
DANGER:
Indicates
a hazard, which, if not avoided, will result in serious
injury, including death, or equipment and property damage.
PE
+
-
On
Tank
Set Temp
Tank Heater
Off
Heated Hose
Standby Temp
Alarm
Ground
Applicator
Overtemp
Actual Temp
Protective Earth
Pump Motor
Adhesive Flow
Source Power
Valve Group
Manual Task
Input
Output
WARNING:
Indicates a hazard, which, if not avoided, can result in
serious injury, or equipment and property damage.
CAUTION:
Indicates a hazard, which, if not avoided, can result in
minor injury, or equipment and property damage.
DANGER:
High Voltage. Can cause serious injury, including
death. Disconnect electrical power at external source before
servicing.
WARNING:
Hot Surface. Can cause serious injury and burns.
Wear heat resistant clothing, gloves and safety goggles.
WARNING:
Disconnect electrical power at external source.
Failure to do so can cause electrical shock.
WARNING:
High Pressure. System contents under pressure. Can
cause serious injury and burns or equipment and property
damage. Relieve pressure before servicing.
!
!
!
2
SS96 Hot Melt Unit 19600-135 Rev. B 10/26/00
1.6 Safety Symbols and Signal Words
The following safety symbols and signal words are used throughout the
manual and on the product to alert the reader and operator to personal
safety hazards or to identify conditions that may result in equipment or
property damage.
General Safety Symbols
Specific Symbols and Signal Words
Other Product Symbols
The manufacturer reserves the right to make design changes for product
improvement. This manual may not reflect all details of these
improvements.
DANGER:
Indicates
a hazard, which, if not avoided, will result in serious
injury, including death, or equipment and property damage.
PE
+
-
On
Tank
Set Temp
Tank Heater
Off
Heated Hose
Standby Temp
Alarm
Ground
Applicator
Overtemp
Actual Temp
Protective Earth
Pump Motor
Adhesive Flow
Source Power
Valve Group
Manual Task
Input
Output
WARNING:
Indicates a hazard, which, if not avoided, can result in
serious injury, or equipment and property damage.
CAUTION:
Indicates a hazard, which, if not avoided, can result in
minor injury, or equipment and property damage.
DANGER:
High Voltage. Can cause serious injury, including
death. Disconnect electrical power at external source before
servicing.
WARNING:
Hot Surface. Can cause serious injury and burns.
Wear heat resistant clothing, gloves and safety goggles.
WARNING:
Disconnect electrical power at external source.
Failure to do so can cause electrical shock.
WARNING:
High Pressure. System contents under pressure. Can
cause serious injury and burns or equipment and property
damage. Relieve pressure before servicing.
!
!
!
2
SS96 Hot Melt Unit 19600-135 Rev. B 10/26/00
1.6 Safety Symbols and Signal Words
The following safety symbols and signal words are used throughout the
manual and on the product to alert the reader and operator to personal
safety hazards or to identify conditions that may result in equipment or
property damage.
General Safety Symbols
Specific Symbols and Signal Words
Other Product Symbols
The manufacturer reserves the right to make design changes for product
improvement. This manual may not reflect all details of these
improvements.
DANGER:
Indicates
a hazard, which, if not avoided, will result in serious
injury, including death, or equipment and property damage.
PE
+
-
On
Tank
Set Temp
Tank Heater
Off
Heated Hose
Standby Temp
Alarm
Ground
Applicator
Overtemp
Actual Temp
Protective Earth
Pump Motor
Adhesive Flow
Source Power
Valve Group
Manual Task
Input
Output
WARNING:
Indicates a hazard, which, if not avoided, can result in
serious injury, or equipment and property damage.
CAUTION:
Indicates a hazard, which, if not avoided, can result in
minor injury, or equipment and property damage.
DANGER:
High Voltage. Can cause serious injury, including
death. Disconnect electrical power at external source before
servicing.
WARNING:
Hot Surface. Can cause serious injury and burns.
Wear heat resistant clothing, gloves and safety goggles.
WARNING:
Disconnect electrical power at external source.
Failure to do so can cause electrical shock.
WARNING:
High Pressure. System contents under pressure. Can
cause serious injury and burns or equipment and property
damage. Relieve pressure before servicing.
!
!
!
