4.3” Designer Touch Screen
Crestron
TPMC-4SMD
Touch the
IP Address / Hostname
button. The on-screen keyboard opens, as shown
in the illustration below.
On-Screen Keyboard
Touch
CLEAR
to remove any previous entry. Then enter the address required.
Touch
OK
to accept the entry or
CANCEL
to cancel the entry. This hides the on-
screen keyboard and returns the display to the “Edit Control System Settings” screen.
On the “Edit Control System Settings” screen, touch
Save
to keep the change or
Cancel
to cancel the change and return to the “Control System Interface” menu.
To edit the port,
CIP ID
or
Device ID
, touch the appropriate button. Touching the
Port (41794)
button opens the numeric keypad. Touching the
CIP ID
or
Device ID
buttons opens a hex keypad, shown in the illustration that follows.
Hex Keypad
Touch
CLEAR
to remove any previous entry. Then enter the ID required. Touch
OK
to accept the entry or
CANCEL
to cancel the entry. This hides the hex keypad
and returns the display to the “Edit Control System Settings” screen.
On the “Edit Control System Settings” screen, touch
Save
to keep the changes or
Cancel
to cancel the changes and return to the “Control System Interface” menu.
From the “Control System Interface” menu, to edit or remove an IP entry, first touch
the appropriate button containing the entry. Then touch
Edit IP
or
Remove IP
as
appropriate. Editing an entry displays the “Edit Control System Settings” screen
(refer to the middle illustration on page 13). Removing an entry displays a message
saying
Please Confirm IP Table Entry Removal By Pressing the OK Button
, as
shown in the illustration below.
14
•
4.3” Designer Touch Screen: TPMC-4SMD
Operations & Installation Guide – DOC. 7027E
