Sonnex Multiroom Audio System
Crestron
SWAMP(I)-24X8
44
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8
Operations Guide – DOC. 7049E
Operation
The SWAMP-24X8 can be controlled from the front panel or the Sonnex Tool in
Crestron Toolbox.
NOTE:
For information on Crestron Toolbox, refer to the Crestron Toolbox help
file.
Power
To turn on the SWAMP-24X8, move the
POWER
switch to . To turn off the
SWAMP-24X8, move the
POWER
switch to .
Operating Modes
When operated from the front panel, the SWAMP-24X8 operates in either
Zone
mode or
Source
mode.
Use the “Main Menu” to select
Zone Mode
or
Source Mode
. To display the “Main
Menu”, press
MENU
until
Main Menu
appears on the display.
“Main Menu”
Main Menu
Source Mode
▲
Zone Mode
Zone
mode
uses the front panel to route a source signal to a selected zone. To use
Zone
mode, perform the following procedure:
1.
From the “Main Menu”, press
q
or
▲
to display
Zone Mode
and press
ENTER
.
2.
Press the
ZONE
button of the zone to be controlled.
3.
Press the
SOURCE
button of the source to be routed. The associated
SOURCE
and
ZONE
LEDs light and the display shows the zone’s selected
source. Alternatively, press the
ZONE
button twice to turn on the zone and
connect the source that was selected last.
4.
To turn off the zone, press the
ZONE
button.
5.
Press
MENU
to return to the “Main Menu”.
Source Mode
Source
mode uses the front panel to select a source signal and route it to multiple
zones. To use
Source
mode, perform the following procedure:
1.
From the “Main Menu”, press
q
or
▲
to display
Source Mode
and press
ENTER
.
2.
Press the
SOURCE
button of the source to be routed. The associated
SOURCE
LED lights.
3.
Press the
ZONE
button(s) of the zone(s) to be selected. The associated
ZONE
LED(s) lights.
4.
To remove a zone from a source, press the desired
ZONE
button. The
associated
ZONE
LED turns off.
Summary of Contents for Sonnex SWAMP(I)-24X8
Page 1: ...Crestron SWAMP I 24X8 Sonnex MultiroomAudioSystem Operations Guide ...
Page 4: ......
Page 6: ......
