Crestron Sonnex SWAMP(I)-24X8, Operation Manual

Page: 27 / 56

Crestron
SWAMP(I)-24X8
Sonnex Multiroom Audio System
Operations Guide – DOC. 7049E Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
21
Typical Balanced/Unbalanced Inputs
Balanced Input
+
Right
Left
Shield
L R
+ - + - G
+
Jumpers
Unbalanced Input
+
Right
Left
L R
+ - + - G
+
CH Device Connections
Devices with a RJ-45 CH output such as the CEN-IDOCV can be connected to the
balanced inputs on the SWAMP-24X8 as shown in the following table.
CH Output to SWAMP-24X8 Balanced Input
PIN
WIRE COLORS
(568B)
AUDIO I/O
BALANCED INPUT
CONNECTION
1 WHITE/ORANGE + Audio Left Out L +
2 ORANGE - Audio Left Out L -
3 WHITE/GREEN + Audio Right Out R +
4 BLUE N/A
5 WHITE/BLUE N/A
6 GREEN - Audio Right Out R -
7 WHITE/BROWN N/A
8 BROWN N/A
Speaker Connections Make speaker connections to the SWAMP-24X8 as shown in the following diagram.
Speaker Connections
+
-
R
+
-
L
NOTE: If the SAT-70V/100V Sonnex Output Transformer is connected to a
speaker terminal, use the SAT-70V/100V profile built into the Sonnex Tools
application to configure a high-pass filter on the zone that is connected to the
SAT-70V/100V. For details, refer to the Sonnex Tools help file.