manualshive.com logo in svg

Crestron Sonnex SWAMP(I)-24X8, Operation Manual

Share
Download
Crestron Sonnex SWAMP(I)-24X8 Operation Manual Download Page 48

Sonnex Multiroom Audio System 

  Crestron 

SWAMP(I)-24X8

 

42  

•

  Sonnex Multiroom Audio System: SWAMP(I)-24X8 

Operations Guide – DOC. 7049E 

USB 

NOTE:

  May be required for initial setup of Ethernet parameters. 

USB Communication 

PC Running

Crestron Toolbox

USB

SWAMP-24X8

 

The 

COMPUTER

 port on the SWAMP-24X8 connects to the USB port on the PC 

via the included Type A to Type B USB cable: 

1.

 

Click 

Tools | System Info

. 

2.

 

Click the 

 icon. 

3.

 

For 

Connection Type

, select 

USB

. When multiple USB devices are 

connected, identify the SWAMP-24X8 by entering “SWAMP-24X8” in the 

Model 

text box, the unit’s serial number in the 

Serial 

text box or the unit’s 

hostname (if known) in the 

Hostname 

text box. 

4.

 

Click 

OK

. Communications are confirmed when the device information is 

displayed. 

TCP/IP 

Ethernet Communication 

SWAMP-24X8

PC Running

Crestron Toolbox

LAN

 

The SWAMP-24X8 connects to PC via Ethernet: 

1.

 

Use the Device Discovery Tool (click the 

 icon) in Crestron Toolbox to 

detect all Ethernet devices on the network and their IP configuration. The 

tool is available in Toolbox version 1.15.143 or later. 

2.

 

Click on the SWAMP-24X8 to display information about the device. 

Programs and Firmware 

Program or firmware files may be distributed from programmers to installers or from 

Crestron to dealers. Firmware upgrades are available from the Crestron website as 

new features are developed after product releases. One has the option to upload 

programs via the programming software or to upload and upgrade via the Crestron 

Toolbox. For details on uploading and upgrading, refer to the Crestron Studio help 

file, SIMPL Windows help file, or the Crestron Toolbox help file. 

Crestron Studio or 

SIMPL Windows 

If a Crestron Studio (or SIMPL Windows) program is provided, it can be uploaded to 

the control system using Crestron Studio (or SIMPL Windows) or Crestron Toolbox. 

Summary of Contents for Sonnex SWAMP(I)-24X8

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands