Sonnex Multiroom Audio System
Crestron
SWAMP(I)-24X8
22
•
Sonnex Multiroom Audio System: SWAMP(I)-24X8
Operations Guide – DOC. 7049E
Bridge Speaker Outputs
(Optional)
The speaker outputs on the SWAMP-24X8 can be bridged to deliver higher power to
a speaker. The left channel on an individual output can be bridged with the right
channel on the same output. Refer to the following diagram when bridging outputs.
Bridging Outputs
+
-
+
-
R
L
The possible bridging combinations are Zone 1 + Zone 2, Zone 3 + Zone 4, Zone 5 +
Zone 6, and Zone 7 + Zone 8. LEDs on the back of the SWAMP-24X8 indicate
bridged outputs.
After the zones are wired for bridged operation, the SWAMP-24X8 must be
configured with the “Installer Mode” menu or with the Sonnex Tools application.
Refer to “Bridge Outputs” on page 33 or the Sonnex Tools help file for more
information.
WARNING:
This amplifier is capable of delivering immense amounts of
undistorted power to the loudspeakers. Please use caution and adequate ear
protection if listening to content at high volume levels as continued exposure to high
sound pressure levels can cause permanent hearing impairment or loss.
Subwoofer Applications
(Optional)
Using a sound level (SPL) meter and Sonnex Tools, the SWAMP-24X8 can be used
to deliver sound to a left-right stereo pair/subwoofer speaker layout. There are two
different wiring configurations that can be used.
Wiring Diagram: Passive Subwoofer Using an Additional Output Pair
+
-
SUB
ROOM
BUSSED
LEFT
RIGHT
STEREO PAIR
+
-
+
-
Summary of Contents for Sonnex SWAMP(I)-24X8
Page 1: ...Crestron SWAMP I 24X8 Sonnex MultiroomAudioSystem Operations Guide ...
Page 4: ......
Page 6: ......
